Windows 98 Will Not Exit Dos Program. Keeps Rebooting and Asks for the Floppy Disk Again

This mistake indicates that the boot sector is damaged or missing.

Resolution

To fix this, apply the post-obit methods to troubleshoot this Windows Start fault.

Note To complete these steps, you must have a Windows viii.1, Windows 8, Windows 7 or Windows Vista installation disc. If you do not have a disc, please contact your calculator manufacturer or Microsoft Support to obtain one. If you do not accept an installation disc and Startup Repair is a preinstalled recovery selection on your computer, try method iv.

Method i: Run Startup Repair from Windows Recovery Environment (WinRE)

To run Startup Repair from the Windows Recovery Environment (WinRE), follow these steps:

1. Insert the Windows installation disc into the disc drive, and then outset the reckoner.

2. Press a primal when the message Press any key to boot from CD or DVD appears.
   If your PC does not detect the media automatically

   1. During the restart process, read the screen for any instructions that explain how to interrupt normal startup and enter the basic input/output organisation (BIOS) setup utility. Most PCs use the F2, F10, ESC, or DEL key to begin the BIOS Setup.

   2. Look for a tab in the BIOS Setup Utility that is labeled Kick Order, Boot Options, or Boot. Post-obit the directions on the screen, use the arrow keys to get to the Kick Order, then press Enter.

   3. Locate the CD, DVD, or USB wink drive (this might be called Removable Device) in the Boot listing. Post-obit the directions on the screen, use the arrow keys to movement the drive upward so that information technology appears first in the Boot list. Press Enter. The boot order sequence is now changed to boot from the CD, DVD, or USB flash bulldoze.

   4. Press F10 to save your changes and to exit the BIOS Setup Utility. Select Yes in the confirmation window. The PC will restart.

3. Select a language, a time and a currency, a keyboard or input method, and and so select Next.

4. Select Repair your computer.

5. In the Organization Recovery Options dialog box, select the drive of your Windows installation, and then select Side by side.

6. At the System Recovery Options dialog box, select Repair your reckoner.

7. Select the operating arrangement that y'all want to repair, and then select Next.

8. In the Organization Recovery Options dialog box, select Startup Repair.

Method 2: Rebuild the boot configuration data (BCD) from Windows Recovery Environs (WinRE)

To rebuild the kick configuration data (BCD) from Windows Recovery Environment (WinRE), follow these steps:

1. Put the Windows installation disc in the disc drive, and then start the computer.

2. Press a primal when the message Press whatsoever key to kick from CD or DVD appears.
   If your PC does not detect the media automatically

   1. During the restart process, read the screen for whatever instructions that explain how to interrupt normal startup and enter the basic input/output system (BIOS) setup utility. Well-nigh PCs employ the F2, F10, ESC, or DEL key to begin the BIOS Setup.

   2. Wait for a tab in the BIOS Setup Utility that is labeled Boot Lodge, Kicking Options, or Boot. Following the directions on the screen, use the arrow keys to become to the Kick Guild, so printing Enter.

   3. Locate the CD, DVD, or USB flash bulldoze (this might be chosen Removable Device) in the Kick list. Following the directions on the screen, use the arrow keys to move the drive up and then that it appears kickoff in the Boot list. Printing Enter. The kicking order sequence is now changed to boot from the CD, DVD, or USB flash drive.

   4. Press F10 to save your changes and to exit the BIOS Setup Utility. Select Yep in the confirmation window. The PC will restart. Let the PC to restart commonly. The browse will take a few minutes and remove any malware that may be infecting your computer.

3. Select a language, a time, a currency, a keyboard or another input method, so select Adjacent.

4. Select Repair your estimator.

5. Select the operating system that you want to repair, and then selectAdjacent.

6. In the System Recovery Options dialog box, select Command Prompt.

7. Blazon Bootrec /RebuildBcd, and and so printing ENTER.

For more information about how to use Bootrec.exe, see How to employ the Bootrec.exe tool in the Windows Recovery Surroundings to troubleshoot and repair startup issues in Windows.

Method 3: Run System Restore from Windows Recovery Environment (WinRE)

Important This method requires that Arrangement Restore is enabled on your computer.

To run System Restore from Windows Recovery Environment (WinRE), follow these steps:

1. Insert the Windows installation disc into the disc drive, and so start the computer.

2. Press a key when the message Press any key to kick from CD or DVD appears.
   If your PC does non discover the media automatically

   1. During the restart procedure, read the screen for whatsoever instructions that explain how to interrupt normal startup and enter the basic input/output system (BIOS) setup utility. Nigh PCs use the F2, F10, ESC, or DEL fundamental to begin the BIOS Setup.

   2. Look for a tab in the BIOS Setup Utility that is labeled Boot Social club, Kicking Options, or Boot. Following the directions on the screen, use the pointer keys to get to the Kick Order, then printing Enter.

   3. Locate the CD, DVD, or USB wink drive (this might exist called Removable Device) in the Kicking list. Post-obit the directions on the screen, use the arrow keys to move the bulldoze upwards so that information technology appears beginning in the Kicking list. Press Enter. The boot gild sequence is now changed to kick from the CD, DVD, or USB flash drive.

   4. Printing F10 to save your changes and to leave the BIOS Setup Utility. Select Yes in the confirmation window.

3. Select a language, a time and currency, and a keyboard or input method, and so select Side by side.

4. Select Repair your figurer.

5. In the Organization Recovery Options dialog box, select the bulldoze of your Windows installation, and so select Next.

6. In the System Recovery Options dialog box, select System Restore.

7. Follow the System Restore Wizard instructions and select the appropriate restore point.

8. Select Finish to restore the arrangement.

For more information about how to apply Arrangement Restore, see System Restore: frequently asked questions.

Method 4: Employ Startup Repair on a computer that has a preinstalled recovery option on your figurer

Of import This method is available but if Startup Repair is a preinstalled recovery option on your computer.

If y'all do not take a Windows installation disc, and Startup Repair is a preinstalled recovery option on your calculator, follow these steps to repair startup files:

1. Remove all floppy disks, CDs, and DVDs from your computer, and so restart your computer by using the reckoner'southward ability push button.

   • If your computer has a single operating organization installed, press and hold the F8 key as your figurer restarts. You have to press F8 earlier the Windows logo appears. If the Windows logo appears, yous have to try again by waiting until the Windows logon prompt appears, and and so shutting downward and restarting your estimator.

   • If your computer has more than 1 operating system, use the pointer keys to highlight the operating system that you want to repair, and so press and concur F8.

2. On the Advanced Boot Options screen, use the arrow keys to highlight Repair your computer, so press Enter. (If Repair your computer isn't listed as an option, then your reckoner doesn't include preinstalled recovery options, or your network ambassador has turned them off.)

3. Select a keyboard layout, and so select Next.

4. Select a user name, type the password, and and then select OK.

5. On the System Recovery Options menu, select Startup Repair. Startup Repair might prompt you to make choices as it tries to set the problem and, if it is necessary, information technology might restart your computer equally it makes repairs.

brownthalf1953.blogspot.com

Source: https://support.microsoft.com/en-us/topic/-bootmgr-is-missing-press-ctrl-alt-del-to-restart-error-when-you-start-windows-8bc1b94b-d243-1027-5410-aeb04d5cd5e2

Share this post